User`s manual

13
When you have made your decision, mouse click on the appropriate DSP. You
will then see this dialog window. This is the dialog window for DSP 2:
Figure 10.
If your system is using analog converter cards and you are building a four input
design, an input card will occupy Slot 2 and therefore you will avoid using outputs
2a and 2b. (Using an MDM-1 digital card in Slot two will allow you to use that port
for both two channels of input and two channels of output simultaneously.)
If your system is two inputs and six or less outputs, we recommend that you
leave slot two “empty”. This will allow you to easily add either two more inputs
OR two more outputs for future system expansion.
The input select box will be automatically set when you wire something to this
output, so disregard this box for now. As mentioned before, you can rename this
device now or edit it later.
As you move your mouse pointer over the various devices on your screen, you
will see the name of that device. This will either be the default name or a name
you have chosen. As you move the pointer over the input and output triangles,
you will see what I/O port they are attached to:
Figure 11.