User Guide

1918
RL Series
EV’s RL Series DSP-Controlled amplifiers are tightly integrated into the IRIS-Net platform.
They are the ideal companion to the NetMax N8000 system controller and combine legendary
performance with uncompromised remote control and system supervision capability. When you
need DSP power in multiple locations, the RL line is the state-of-the-art choice. They employ
EV’s proven signal processor technologies, and they guarantee superior audio performance.
P3000 RL
The flagship of the RL Series, with 2 x 1300 watts into 4 ohms and 2 x 1800 watts into 2
ohms, is the the digital controlled version of the legendary P3000 amplifier. Loudspeaker
outputs on Neutrik
®
Speakon
®
NL4 connectors.
P1200 RL / RT
The universally recognized P1200 features with 2 x 600 watts into 4 ohms and 2 x 850
watts into 2 Ohms. Loudspeaker outputs on barrier strip.
For the RT model, the unit features a high-impedance output for 100/70V-lines with 2 x
590 watts.
P900 RL / RT
Featuring 2 x 450 watts into 4 ohms and 2 x 650 watts into 2 ohms, the P900RL is ideal
for HF drive in multi-way systems. Loudspeaker outputs on barrier strip.
For the RT model, the unit has a high-impedance output for 100/70V-lines with 2 x 410
watts. Loudspeaker outputs on barrier strip.
RL Series Specifications
CPS Series Amplifier Specifications
The CPS Class-H High Efficiency Series
In any NetMax system, when onboard DSP and supervision is not required, these proven power
amplifiers offer our legendary performance and reliability in a new compact, lightweight format. This is
made possible by incorporating a highly efficient Class-H design, which results in substantially less
heat being generated. This allows the overall size of the amplifier to be reduced substantially without
sacrificing performance or reliability.
All four models are capable of remote control activation with adjustable power-on delay
times saving time and money in lar
ger installs with central power distribution. These
features make them ideal amplifiers to a NetMax N8000 system where central DSP
processing is desired. The specifications speak for themselves. Four models are available
ranging from 400 watts/channel all the way up to 1100 watts per channel into 4 ohms.
CPS 2.4
The CPS2.4 is ideal for smaller full range systems or larger mid/high frequency amplification in larger installations. The CPS2.4 is an ideal companion
to the popular EVID line of premium surface mount and ceiling speaker systems.
CPS 2.6
The workhorse of the line. Its 600 watts of compact power is perfect for mid level full range installs.
CPS 2.8
At 800 watts per channel the CPS2.8 is the best values in the line. It can power a wide range of speaker cabinets either in multi-way or full range
modes for a large range of fixed installation jobs.
CPS 2.11
No power amplifier on the market can offer such a high level of power performance and reliability. At 1100 watts/channel the CPS2.11 can power large
stadium, theatre and auditorium type installations with ease.
EV Has A Wide Range Of Amplifiers For Any NetMax System
CPS 2.4 CPS 2.6 CPS 2.8 CPS 2.11
Load Impedance
2Ω 4Ω 8Ω 2Ω 4Ω 8Ω 2Ω 4Ω 8Ω 2Ω 4Ω 8Ω
Continuous Output Power (1 kHz, THD 1%) 600W 400W 240W 900W 600W 350W 1100W 800W 500W 1600W 1100 W 600W
Rated Output Power THD = 0.1 %, 20 Hz-20kHz - 300W 150W - 500W 250W - 700W 350W - 900W 450W
Input Sensitivity Rated power @ 8 ø, 1 kHz +1.15 dBu (0.88 Vrms) +3.2 dBu (1.12 Vrms) +4.7 dBu (1.33 Vrms) +5.8 dBu (1.51 Vrms)
THD @ rated output power (<0.1%) < 0.05 %
IDE- SMTP 60 Hz, 7kHz < 0.02 %
Maximum Input Level +22 dBu (9.76 Vrms)
Cr
osstalk r
ef. 1 kHz, rated output power
< -80 dB
Frequency Response ref. 1 kHz 15 Hz ... 40 kHz (±1dB)
Damping Factor 1 kHz > 300
Slew Rate 35 V/µs
Signal to Noise Ratio
(A-weighted)
103.5 dB 105.5 dB 107 dB 107 dB
Power Requirement 240 V, 230 V, 220 V, 120 V or 100 V ; 50 ... 60 Hz (factory configured)
Net Weight 30.8 lbs (13.5 kg) 33 lbs (15 kg) 35.2 lbs(16 kg) 17.96 lbs (8.15 kg)
Dimensions (Width x Height x Depth) 19” x 3.5” x 15.22” (483 mm x 88.1 mm x 386.8 mm)
P900 RL P1200 RL P3000 RL P900 RT
P1200 RT
Load Impedance
8
Ω 4Ω 2Ω 8Ω 4Ω 2Ω 8Ω 4Ω 2Ω
100V 70 V 100V 70 V
Continuous Output Power (1 kHz, THD 1%) 280 W 450 W 650 W 380 W 600 W 850 W 850 W 1300 W 1800 W 410 W 400 W 590 W 580 W
Rated Output Power (20 Hz-20 kHz, THD <0.2%) 230 W 350 W 450 W 300 W 500 W 650 W 750 W 1200 W 1500 W 350 W 350 W 500 W 500 W
THD @ Rated Output Power < 0.05% <0.1% <0.2% <0.1% <0.2%
Inter
modulation (SMPTE)
<0.08% <0.01% <0.1% <0.3% <0.1% <0.3%
Signal to Noise Ratio > 105 dB >100 dB
Frequency Response (-1 dB) 20 Hz - 20 kHz 45 Hz - 20 kHz
Dynamic Audio Limiter THD <= 1% (Input signal <= + 20 dBu)
Protections Hi-Temperature, DC, HF, Back EMF, Peak Current Limiter, Inrush Current Limiter, Power On Delay
Cooling 3(4)-stage fan, front-to-rear cooling
Input Sensitivity and Impedance 1.55 V (+6dBu), 20 kOhm, XLR Input
Maximum Input Level 8.7 V (+21 dBu)
Serial Interface Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Control Logic in and Outputs
2 x 0V 5V fr
ee configurable, Easy-Remote
Loudspeaker Connectors Barrier Strip Neutrik
®
Speakon
®
NL4 Barrier Strip
Dimensions (Height x Width x Depth)
5.2” x 19” x 15.4” (132.5 x 483 x 390 mm) (3 RU)
Net Weight 35.3 lbs (16 kg) 37.5 lbs (17 kg) 66.2 lbs (30 kg) 53 lbs (24 kg) 55.1 lbs (25 kg)