Owner's Manual

Electro-Voice Tour X Owner’s Manual5

Suspending TX1122, TX1152, and TX2152 (continued)

WARNING: Eyebolts must be fully seated and orient in the plane of pull as

shown. Always use fender washers at least 1.5” in diameter and 1/16” thick

under the eyebolt to distribute the load on the enclosure (Figure 3). See

Figures 5-6 on proper ways to suspend a Tour X loudspeaker.

Figure 3b:

Eyebolts Shown Oriented in the

Plane of Pull (CORRECT)

Figure 3c:

Eyebolts not Oriented in the Plane

of Pull (INCORRECT)

Figure 4a:

Maximum Working Load -

Vertical Orientation

Figure 4b:

Maximum Working Load -

Pull-Back (Rear) Point

Figure 4c:

Maximum Working Load -

Horizontal Orientation

50 lbs per

Suspension Point

50 lbs per

Suspension Point

50 lbs Max Force in any

Direction, Pull-Back Only

Figure 3a:

Eyebolt Shown with and

without Washer

Washer

Used

Washer

Used