User manual

Electro Industries/GaugeTech

Doc # E113-7-07 V1.04 3-4

5. Make a selection from the “Connect Using” menu. Different screens will appear, depending on your

selection. All of the screens will take you to the Multiplexor Properties and ASCII Setup screens:

To make a direct connection to the Substation Multiplexor’s Master Port from the computer:

Select Direct to Comx from the “Connect using” pull-down menu, where x is the computer’s com

port or choose the Com Port redirected by Redirect Software. Click OK. The Comx Properties screen

appears:

Select 57600 from the Bits per Second pull-down menu. (The Substation Multiplexor's Master Port

is factory-set to 57600 baud.) Click the Advanced button to set Receive and Transmit Buffers. Click

OK.

Select Properties from the File Menu on your main screen and click the Settings tab. Skip to step 7.

6. Click OK. The following screen appears.