User manual

e Electro Industries/GaugeTech Doc # E113-7-07 V1.04 1-4
Master Port for Ethernet Standard RJ45. Set the 232(DCE) Network Switch to Network when using Ethernet.
Slave Por
ts 1 & 2
2-wire RS485
MAC Address
232(DCE) Network Switch for Master Port When using Ethernet, set to Network. When connecting directly to a computer from the RS232 Master Port, set to 232 (DCE).
Slave Ports 3–16 9-pin female RS232 ports. Use a standard RS232 cable.
Power Supply
Relay (Detail)
Master Port RS232 For direct connection to a computer.
BBaacckk
PPaanneell
1.2: Communication Connections
• All Slave Ports are factory-set to operate at 9600 baud and
the Master Ports are factory-set to operate at 57600 baud.
• The maximum baud rate for all Slave Ports is 57600.
••
The baud rate for a Master Port is 57600.
Com
N.O.
N.C.
POWER
RS232 SLAVE PORTS
DTE
RS232 SLAVE PORTS
RJ 45
232(DCE)
NETWORK
MASTER PORT
3
4
5
6
7
8
9
10
11
12
13
14
15
16
S - + S - +
1 2