User manual

eElectro Industries/GaugeTech Doc # E113-7-03-1.18 2-11
2.7: Port Status
n
Use this command to view a list of Slave Port settings.
• Type HS[Enter]. The following screen appears.
SUBSTATION MULTIPLEXOR PORT STATUS
------------------------------------------------------
No. LINE FLOW CTRL BAUD RATE PORT NAME
------------------------------------------------------
01 | RS485 | NONE | 9600 | DMMS
02 | RS485 | NONE | 38400 | CPU1000
03 | RS232 | NONE | 19200 | NA
04 | RS232 | NONE | 9600 | NA
05 | RS232 | HARDWARE | 9600 | NA
06 | RS232 | NONE | 9600 | NA
07 | RS232 | NONE | 9600 | NA
08 | RS232 | NONE | 9600 | NA
09 | RS232 | NONE | 9600 | NA
10 | RS232 | NONE | 9600 | NA
11 | RS232 | NONE | 9600 | NA
12 | RS232 | NONE | 9600 | NA
13 | RS232 | NONE | 9600 | NA
14 | RS232 | NONE | 9600 | NA
15 | RS232 | NONE | 9600 | NA
16 | RS232 | NONE | 9600 | NEXUS
------------------------------------------------------