User manual

eElectro Industries/GaugeTech Doc # E113-7-03-1.18 2-3
2.2: Using Windows2.2: Using Windows
®®
HyperTerminal with the Substation MultiplexorHyperTerminal with the Substation Multiplexor
n
Windows
®
HyperTerminal is just one type of communications program you may use to configure the
Substation Multiplexor.
1. Refer to Chapter 1 for installation and communication instructions.
2. From the Windows
®
Start Menu, select Programs, Accessories, Communications, HyperTerminal.
3. Double-click on the HYPERTRM.exe icon. The following screen appears:
4. Type a name for the location, such as “Multiplexor”, and choose an icon. This saves the connection
information for future use. Click OK. The following screen appears: