User Manual

CONFIGURATIONS
The SWITCHBLADE PRO offers many different possible configurations to satisfy your various
effects pedal, amp, and instrument routing needs. Here are a few examples.
SERIES EFFECTS
Shown below are two effects chains that can be used individually as clean (delay and reverb)
and dirty (overdrive and phaser) sounds, but can also be used in series (FX loop B  FX loop
A) when engaging the A+B footswitch.
CONFIGURATIONS (cont.)
PARALLEL EFFECTS
This is an example of two effects chains that you may want to use in parallel. The synth
pedal is feeding the delay in FX loop B while the compressor is feeding the reverb pedal in
FX loop A. With the SERIES/PARALLEL toggle switch set to PARALLEL, each FX loop is
independent and does not affect the other. The outputs of each FX loop are summed and
sent to the guitar amp.