User Manual

14
MIDI CLOCK SETTING ( CLC ):
• The CLC setting controls whether or not the Super Switcher sends
out MIDI Clock information.
• Press and release VALUE and the character display will show ON .
Turn the encoder knob to select ON or OFF .
• Press and release VALUE to go back. Turn VALUE to show thU .
MIDI THRU SETTING ( tHU ):
• The thU setting controls whether messages received on the Super
Switcher’s MIDI IN port are relayed to the MIDI OUT port.
• Press and release VALUE and the character display will show OFF .
Turn VALUE to select ON or OFF .
• Press and release VALUE to go back.
EXIT SETUP MENU:
• At any time while editing the Global Settings menu, press and hold
VALUE to save the current settings and exit Global Settings.
TEMPO MONITOR DISPLAY
In Preset Mode or Instant Access Mode press and release VALUE to enter
the Tempo Monitor display, which displays the current BPM value.
The value can be fine-tuned by turning VALUE, or by pressing the TAP
footswitch two or more times at the required tempo.
If the Super Switcher is receiving MIDI Clock, the displayed BPM value
represents the received MIDI Clock tempo.
Press and release VALUE to exit the Tempo Monitor display or press
footswitches 1-8 to exit and engage that preset. Pressing PRESET,
TUNER, BOOST, CTRL1 or CTRL2 will also exit the Tempo Monitor.