User Manual

12
SETUP MENU
GLOBAL SETTINGS
The Super Switcher has many global settings that help to maximize
flexibility. Access the Global Settings menu by doing the following:
ACCESS AND NAVIGATE GLOBAL SETTINGS MENU:
Make sure you are in Preset mode. The display should not show
IA
or
IA2
. If it does, press the PRESET footswitch.
Ensure a preset is not loaded. For example, the display might
show
01.2
. Unload the preset by pressing footswitch 2. Now the
display shows
01._
.
Press and hold the VALUE knob for a couple seconds. The
character display will change to
bFr
.
The Global Settings menu is now active.
Turn the VALUE knob to scroll through all Global Settings
headings, such as
bFR
,
bPn
,
tAP
, etc.
Press and release VALUE to jump in and out of each setting.
Turn VALUE to change the settings value. Press and release
VALUE to jump back up to the headings.
BUFFER SETTING (
bFr
):
The
bFr
setting controls the status of the input buffer. This is a
global setting and not per preset. The input buffer can help if long
runs of cables are causing high-end loss, particularly between the
Super Switcher and its effects loops or to an amplifier.
Press and release VALUE to set the status of the buffer. Turn
VALUE to select
ON
or
OFF
.
Press VALUE knob to go back. Turn VALUE to show
bPN
.
BPM SETTING (
bPN
):
The
bPN
setting controls whether newly received BPM information
is applied globally to all presets or only to the selected preset.
Press and release VALUE to set the status of the BPM setting.
Then turn VALUE to select
LOC
or
GLO
.
LOC
setting only updates the selected preset.
GLO
will update the
BPM of the entire Super Switcher.
Press and release VALUE to go back. Turn VALUE to show
tAP
.