User Manual

33
9. Once you have set the knobs for the toe-down position, press and
release the EXP MODE button to save the toe settings.
10. The EXP MODE button will light solid and your custom Expression
Setting for the currently selected Reverb Type is now saved and ready
to use. It will remain saved even after powering down the pedal.
11. Repeat these steps if you want to update the Expression Setting.
12. Press and release the REVERB TYPE knob at any time to cancel out of
Expression Setting setup without saving.
ERASING CUSTOM EXPRESSION SETTINGS
1. Turn the REVERB TYPE knob to select the Reverb Type for which you
want to restore the factory default Expression Setting.
2. Press and hold the EXP MODE button. After one second, the other
illuminated buttons (such as TAILS) will blink.
3. While the other buttons are still blinking, tap the footswitch of the
reverb engine on which the custom expression setting is saved.
4. The other illuminated buttons will stop blinking. The Expression
Setting is now restored to the factory default. You can now release
the EXP MODE button.