User Manual

30
EXTERNAL FOOTSWITCH FUNCTIONALITY
The Oceans 12 accepts a single momentary footswitch (with TS plug) or
a double or triple footswitch (with TRS plug) at its FSW jack. After inserting
a footswitch, the Oceans 12 should rapidly blink the A/B SELECT and INF
LEDs for one second. If other LEDs are blinking, the Oceans 12 mistakenly
thinks an expression pedal is inserted, so re-insert the footswitch until you
observe the correct confirmation. The following chart describes the
functions for each footswitch depending on the current engine selection
of the Oceans 12. When using a single momentary footswitch, the “TIP
SWITCH” functions are available.
CURRENTLY-
SELECTED
REVERB
ENGINE
TIP SWITCH /
SINGLE FSW
RING SWITCH
TIP+RING
SWITCH
A
SELECT change
to Reverb B
TAP and INF for
Reverb A
TAP and INF
for Reverb B
B
SELECT change
to Reverb A
TAP and INF for
Reverb A
TAP and INF
for Reverb B
When an external footswitch in connected, it overrides the TAP and
INFINITE ability on the local footswitches. External triple footswitches
can trigger infinite sustain for either reverb engine, regardless of the
current engine selection and TAILS status.