User Manual

22
REVERB TYPE AND MINI KNOB DETAILS
Note: for every Reverb Type, the values of the mini knobs are “sticky”:
they’re remembered for each mode when switching between them. For
example, for the ROOM Reverb Type, you can dial in distinct Predelay
Feedback and Mod Depth settings for Mode 1 and Mode 2.
ROOM –
MODE: Selects between a lively room reverb from the EHX Cathedral
(Mode 1) and the beloved hall reverb algorithm from the EHX Holy
Grail (Mode 2).
P.D. FBACK: This knob controls the pre-delay feedback: the amount
of signal that is sent from the output of the pre-delay block back to
the input of the pre-delay block. With a pre-delay time long enough
to hear discrete echoes, turning the P.D. FBACK knob clockwise will
cause the pre-delay block to produce multiple echoes from one note.
Each echo then goes into the reverb block producing multiple reverb
washes from one note.
MOD DEPTH: Use this knob to add modulation to the room or hall
reverb. As you turn clockwise, the modulation gets wider. Set to fully
counterclockwise for no modulation.