User Manual

17
- MODE BUTTON AND LEDS -
Each Reverb Type on the Oceans 12 has either two or three unique modes
of operation. Pressing the MODE button cycles through these available
modes. The LED labels 1, 2, or 3 show the current mode. When you switch
Reverb Types, the Oceans 12 will recall the last mode you were using in
that Reverb Type.
Below the three numbered LEDs are two LEDs labeled LF and TIDE. These
two LEDs indicate whether LO-FI and/or TIDE, respectively, are currently
on. LO-FI and TIDE are activated and controlled by turning on the
FUNCTION button and adjusting the main knobs whose alternate labels
are LO-FI and TIDE.