User Manual

For the main knobs, the alternate functions are INF LVL, SEND LVL, LO-

FI, and TIDE, respectively. For the mini parameter knobs, these functions

are SRS/PRL and A→B. More details about these alternate knob

parameters can be found in the Dual Reverb section on page 28.

The FUNCTION button can also toggle signal splitting, where Reverb A is

sent to L OUT and Reverb B is sent to R OUT, as illustrated in the diagram

below.

If the FUNCTION button is held down for 2 seconds while the FUNCTION

mode is not already on, all of the Oceans 12’s blue and green LEDs will

start to blink rapidly, indicating that the two signals of the two reverb

engines are now being split into L and R outputs. To disable signal-splitting

and bring the Oceans 12 back to regular stereo operation, hold down the

FUNCTION button when FUNCTION isn’t already on. The blue and green

LEDs will again start blinking rapidly to indicate that the turn-off procedure

has begun. After 2 seconds, signal splitting will be disabled. The on/off

status of this routing scheme is remembered even after power-cycling.

Signal splitting is disabled if the SEND/RETURN FX LOOP is on.