User Manual

- INFINITE REVERB FUNCTIONALITY –

In most OCEANS 11 reverb types, infinite reverb is accessible. Infinite

reverb increases the decay time of the currently-selected reverb to infinite

and redirects the musician’s playing to a fresh reverb of the same type.

Infinite reverb also disables the MODE button and overrides the TIME and

TONE knobs such that they respectively control the TIME and TONE knobs

of the fresh reverb. This allows you to sculpt the fresh reverb sound to

your liking without altering the infinite reverb in the background.

USING INFINITE REVERB

1. Decide which footswitch to use for controlling this feature. You can

use either the internal footswitch or an external footswitch connected

to the INFINITE jack. Plugging in an external footswitch, however,

always disables the internal footswitch’s infinite reverb functionality.

2. If using the internal footswitch, ensure that the internal “TAILS” switch

is ON; infinite reverb is inaccessible when this switch is OFF. If using

the external footswitch, however, infinite reverb can be engaged

regardless of whether TAILS is on or off.

3. Press and hold down the footswitch for more than 350 milliseconds.

The LED will quickly cycle green, red, then orange to indicate that

infinite reverb is engaged.

4. To exit infinite reverb, release the footswitch. The pedal will return to

the state it was in before engaging infinite reverb.

USING OTHER CONTROLS WITH INFINITE REVERB

1. The FX LVL and Reverb Type knobs always function normally when

Infinite Reverb is engaged.

2. When using the TIME or TONE knob to sculpt the fresh reverb sound,

the infinite reverb’s time and tone that was set by those knobs before

engaging infinite reverb are preserved.

3. As long as infinite reverb is accessible, it can be engaged regardless

of whether the OCEANS 11 is in Secondary Knob Mode.

4. When entering infinite reverb, the OCEANS 11 preserves its TIME and

TONE knob values. If the overriding TIME and TONE knobs are moved

while infinite reverb is engaged, and infinite reverb is then

disengaged, the original TIME and TONE knob values will be recalled

unless they are moved again.

5. After disengaging infinite reverb, the fresh reverb will continue to play

according to the decay rate and tone specified by the overriding TIME

and TONE knob values. Additionally, these values are preserved for

the next time infinite reverb is engaged. Changing reverb types or