User Manual

6
tempo enable/disable setting until it is changed again, even if the pedal is
removed from power.
You can also reset the internal footswitch’s tap tempo to the factory
default setting of enabled by holding the footswitch when resetting
secondary knob settings. See step 3 in “Erasing Secondary Knob Settings”
on page 8.
ROTARY SPEED SWITCH
There is no tap tempo available for the ROTARY mod type. When an
external switch is connected to the TAP IN jack, clicking that switch will
accelerate/decelerate the rotation speed. The “fast” speed is the default
speed, set with the RATE knob. The “slow” speed is set by a secondary
knob control (see page 9). The external acceleration switch only works in
the ROTARY’s green mode.
MOMENTARY
If you are in bypass mode and you press and hold down the footswitch,
you will now be in momentary mode and the MOD 11 will re-enter bypass
upon releasing the footswitch. You can disable this option by unscrewing
the back plate of the MOD 11 and switching the internal “TAILS” switch to
off. This option is good for adding quick accenting effects on only certain
moments of your playing.