User Manual

CHORUS – Green mode is a traditional chorus. Orange mode is a tri-

chorus, three different modulations occurring at once. Red mode is a bass

chorus, in this mode low end is filtered out of the modulated signal and is

boosted in the dry signal, creating a similar effect as the x-over on the

EHX Bass Clone.

ROTARY – There are two modes, regular (green) and envelope (orange).

The envelope works exactly like the orange mode in the TREM and HARM

types

FLANGE – There are two modes, additive (green) and subtractive

(orange) flanger. The additive is a more traditional flanger sound, while

the subtractive has a more tubular and vocal sound.

TZF – The modes work identically to how they do in FLANGE mode,

additive (green) and subtractive (orange).

PHASE – There are three modes, for the number of phase stages in the

phaser algorithm. 4 (green), 6 (orange), and 8 (red). More phase stages

creates a more intense phaser effect.

PITCH – There are 2 modes, in the green mode the pitch modulation is

smooth. In the orange mode the pitch modulates in fixed pitch steps.

FILT – There are three modes, Low Pass Filter (green), High Pass Filter

(orange), and Band Pass Filter (red).

- FOOTSWITCH FUNCTIONALITY -

TAP TEMPO

For most modulation types, the quarter-note modulation speed can be set

with tap tempo. You can use either the built-in footswitch or an external

tap tempo switch connected to the TAP IN jack. Plugging in an external

footswitch, however, always disables the internal footswitch’s tap tempo

functionality. Tap twice at your desired quarter-note tempo to lock in your

tap time.

You can disable the internal footswitch’s tap tempo function. To

disable/enable internal tap tempo, unplug power from the MOD 11, press

and hold the footswitch, then plug power back in while holding the

footswitch. The LED will slowly blink five times if tap tempo is turned off

or will blink twice if tap tempo is turned on. The MOD 11 saves your tap