User Manual

19
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This applies
only to original purchasers who have bought their product from an authorized Electro-
Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired
portion of the original warranty term. If you should need to return your unit for service
within the warranty period, please contact EHX Customer Service at 718-937-8300 or
[e-mail] for a Return Authorization Number. Along with your pedal, please
include a brief description of the problem as well as your name, address, telephone
number, copy of your receipt, and a check or money order.
United States: Europe:
ELECTRO-HARMONIX JOHN WILLIAMS
C/O NEW SENSOR CORP. ELECTRO-HARMONIX UK
55-01 2
ND
STREET 13 CWMDONKIN TERRACE
LONG ISLAND CITY, NY 11101 SWANSEA SA2 0RQ
Attn: CUSTOMER SERVICE UNITED KINGDOM
718-937-8300 [phone]
[e-mail] [e-mail]
- FCC COMPLIANCE –
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate
the equipment under FCC rules.