User Manual

-Power-
9V Power Jack – Connect the output plug of the supplied AC Adaptor into the 9V power jack
at the top of the Micro Synth. The Micro Synth’s maximum current requirement is 55mA at
9VDC. The polarity of the power jack is center negative. The maximum allowable power supply
voltage is 12VDC.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the
enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at
its discretion, a product that fails to operate due to defects in materials or workmanship for a
period of one year from date of purchase. This applies only to original purchasers who have
bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units
will then be warranted for the unexpired portion of the original warranty term. If you should
need to return your unit for service within the warranty period, please include a brief description
of the problem as well as you name, address, telephone number, copy of your receipt, and a
check or money order.
United States - $12
Canada - $15
Europe and outside countries - $25
Ship to:
Electro-Harmonix
C/O New Sensor Corporation
55-01 2nd Street
Long Island City, NY, 11101
Attn: Service Department
Please make checks/money orders payable to New Sensor Corporation.
To hear demos on all EHX pedals visit us on the web at www.ehx.com.
Email us at [e-mail]
XO MICRO SYNTH
INSTRUCTIONS