User Manual

MIDI FUNCTIONALITY
Connect the MIDI OUT of your keyboard, computer or other MIDI device to the HOG2's MIDI IN jack.
MIDI CC MESSAGES
Using MIDI Control Change (CC) messages you can control all of the front panel controls on the HOG2 via MIDI. Here is a list of the CC
messages the HOG2 responds to and the acceptable range of values for each message.
MIDI CC
HOG2 CONTROL
EXPLANATION
RANGE
4
EXPRESSION PEDAL – Coarse
Works as expression pedal for parameter selected by the EXP. MODE LEDs. For most purposes, this CC will work fine alone
but it also works with CC #36 for a finer
expression control.
0…127
7
MASTER VOL Slider
Controls the MASTER VOL slider which
sets the output volume of the HOG2.
0…127
36
EXPRESSION PEDAL – Fine
A fine tune control over the expression
pedal parameter selected by the EXP.
MODE LEDs. This is generally only needed for very fine pitch control. Please
see CC #4 for coarse control over the EXP.
MODES.
0…127
64
FREEZE + GLISS
Expression Control
Allows controls over FREEZE+GLISS
using MIDI CC 64 which is normally used
by keyboard sustain pedals. It also allows
FREEZE+GLISS in the following expression modes: OCTAVE BEND, STEP
BEND, VOLUME and both FREEZE
modes. It will not work when the EXP.
MODE is set to VOLUME, WAH WAH or
FILTER.
0 = No Freeze 127 = Freeze Hold
Gliss occurs with
intermediate values.
85
BYPASS Footswitch
Toggles the HOG2 between bypass and effect mode, the STATUS LED will update
accordingly.
0..63 = BYPASS 64..127 = EFFECT
86
EXP. Footswitch
Equivalent to pressing and holding down
the EXP. Footswitch.
0..63 = FSW Release
64..127 = FSW Press
87
ENVELOPE
Footswitch
Toggles ENV. mode on and off. When
ENV. is on, its LED will light.
0..63 = OFF
64..127 = ON
88
SPECTRAL GATE
Button
Toggles the SPECTRAL GATE mode on
and off. The associated LED will light
accordingly
0..63 = OFF
64..127 = ON
89
EXP. MODE Button
Selects and activates the Expression Modes:
OCTAVE BEND, STEP BEND,
VOLUME, FREEZE+GLISS,
FREEZE+VOL, WAH WAH and FILTER.
The HOG2 will jump directly to a given expression mode upon receiving the proper
MIDI data; you do not need to cycle
through the modes.
0..9 = OCTAVE
BEND
10..19 = STEP BEND
20..29 = VOLUME
30..39 = FREEZE + GLISS
40..49 = FREEZE + VOL
50..59 = WAH WAH
60..127 = FILTER
90
EXP. REVERSE
Button
Toggles the EXP. REVERSE function on
and off. The associated LED will light
accordingly.
0..63 = OFF
64..127 = ON
102
DRY OUTPUT Slider
Controls the DRY OUTPUT slider seting
the volume of the un-effected dry signal.
0…127
103
-2 OCTAVES Slider
Controls the -2 OCTAVES slider which
sets the volume of the synthesized notes 2
octaves below your original notes.
0…127
104
-1 OCTAVE Slider
Controls the -1 OCTAVE slider which sets
the volume of the synthesized notes 1
octave below your original notes.
0…127
105
ORIGINAL Slider
Controls the ORIGINAL slider which sets the volume of the dry signal that goes
through the expression modes, envelope
and filter.
0…127
106
+5TH Slider
Controls the +5TH slider which sets the
volume of the synthesized notes a perfect
fifth above your original notes.
0…127
107
+1 OCTAVE Slider
Controls the +1 OCTAVE slider which sets
the volume of the synthesized notes 1
octave above your original notes.
0…127
108
+1 OCTAVE + 5TH Slider
Controls the +1 OCTAVE +5TH slider
which sets the volume of the synthesized
notes 1 octave and the perfect fifth above
your original notes.
0…127
109
+2 OCTAVES Slider
Controls the +2 OCTAVES slider which
sets the volume of the synthesized notes 2
octaves above your original notes.
0…127
110
+2 OCTAVES + 3RD Slider
Controls the +2 OCTAVES +3RD slider
which sets the volume of the synthesized
notes 2 octaves and the major third above
your original notes.
0…127
111
+3 OCTAVES Slider
Controls the +3 OCTAVES slider which
sets the volume of the synthesized notes 3
octaves above your original notes.
0…127
112
+4 OCTAVES Slider
Controls the +4 OCTAVES slider which
sets the volume of the synthesized notes 4
octaves above your original notes.
0…127
113
ENVELOPE /
LOWER Slider
Controls the LOWER slider in the HOG2’s
ENVELOPE section.
0…127
114
ENVELOPE / UPPER Slider
Controls the UPPER slider in the HOG2’s
ENVELOPE section.
0…127
115
FILTER / FREQUENCY Slider
Controls the FREQUENCY slider in the
HOG2’s FILTER section.
0…127
116
FILTER / RESONANCE Slider
Controls the RESONANCE slider in the
HOG2’s FILTER section.
0…127
EXTRA
FUNCTIONS
117
Save Preset
Save current HOG2 settings to preset
number specified in data field of this CC
message. If the data value is above 119, the
CC message will be ignored.
0..119 = Save to this
preset number
120..127 = CC is
ignored
118
Load Preset
Load preset specified in the data field of this CC message. If the data value is above
119, the HOG2 will unload the preset and
change to What You See Is What You Get
Mode.
0..119 = Load this preset number
120..127 = Load WYSIWYG mode
124
OMNI OFF
Factory Default Value. When HOG2 is set
to OMNI OFF, it will only accept
commands that are on its currently assigned
channel. The omni setting is saved during
power cycles. To change omni modes the
command must be sent on the HOG2’s
current channel setting.
Change from 0 to 1 to
enable OMNI OFF.
125
OMNI ON
When set to OMNI ON, the HOG2 will
accept commands on all MIDI channels.
The omni setting is saved during power
cycles. To change omni modes the
command must be sent on the HOG2’s
current channel setting even if OMNI is set
to ON.
Change from 0 to 1 to
enable OMNI ON.