User Manual

8
EXP Mode – The EXP mode menu assigns the expression pedal/control
voltage (CV) signal within each of the three available sub-menus. Use the
VALUE knob to scroll between the FREQ, GLIS, and VOL sub-menus. Press
VALUE to enter the selected sub-menu.
▪ FREQ. – Expression/CV controls the Frequency of the selected
SHIFT channel creating whammy bar pitch bend effects.
• OFF – Expression/CV frequency control disabled
• SHF1 – SHIFT 1 frequency control only
• SHF2 – SHIFT 2 frequency control only
• BOTH – Both SHIFT 1 and 2 frequency control
• 1XS2 – Cross-shift and crossfade SHIFT 1 with SHIFT 2.
Creates a simultaneous frequency bend and volume
crossfade from SHIFT 1 to SHIFT 2. NOTE: Heel position
(0V) is SHIFT 1’s value and volume setting and the toe
position (+5V) is SHIFT 2’s value and volume setting
▪ GLIS. – Expression/CV controls the rise and/or fall time of pitch
glissando in momentary mode.
• OFF – Expression/CV glissando control disabled
• RISE – Glissando rise-time control only
• FALL – Glissando fall-time control only
• BOTH – Rise and fall-time control
▪ VOL. – Expression/CV controls the amplitude of the selected
channel or an array of combinations that can blend, crossfade, or
invert each channel.
• OFF – Expression/CV volume control disabled
• SHF1 – SHIFT 1 volume control only
• SHF2 – SHIFT 2 volume control only
• BOTH – SHIFT 1&2 volume control
• DRY – DRY volume control only
• D+S1 – DRY and SHIFT 1 volume control
• D+S2 – DRY and SHIFT 2 volume control
• ALL – DRY, SHIFT 1 and SHIFT 2 volume control enabled
• BLND – Blends from DRY to both SHIFT channels
- Note: Heel position (0V) is DRY and toe (+5V) is both
SHIFT 1 and SHIFT
• 1XF2 – Crossfade from SHIFT 1 to SHIFT 2
• 1X2D – Crossfade from SHIFT 1 to SHIFT 2 with DRY
• D1X2 – Crossfade from SHIFT 1 with DRY to SHIFT 2