User Manual

7
SHIFT 1 & 2 Modes – Both SHIFT mode channels are identical. In either
mode, VALUE selects the amount the input signal is transposed. The
VALUE knob scrolls through the available SHIFT mode values, which
covers a total range of +/- three octaves.
SHIFT MODE VALUES
D.
m2
M2
m3
M3
P4
b5
P5
m6
M6
Detune
sub-menu
minor
2
nd
Major
2
nd
minor
3
rd
Major
3
rd
Perfect
4
th
Flat
5
th
Perfect
5
th
minor
6
th
Major
6
th
m7
M7
1OCT
m9
M9
m10
M10
P11
b12
P12
minor
7
th
Major
7
th
1
st
Octave
minor
9
th
Major
9
th
minor
10
th
Major
10
th
Perfect
11
th
Flat
12
th
Perfect
12
th
m13
M13
m14
M14
2OCT
m17
M17
P18
P19
3OCT
minor
13
th
Major
13
th
Minor
14
th
Major
14
th
2
nd
Octave
minor
17
th
Major
17
th
Perfect
18
th
Perfect
19
th
3
rd
Octave
Note: For negative SHIFT values the signal is transposed down from root, -1OC
is an octave below and a detune value of -38c, for example, is 38 cents below the
root.
Selecting detune (D.) in a SHIFT mode detunes the input signal by an
amount of +/- 99 cents. The detune sub-menu adjusts the amount in one-
cent increments, ranging from 1 to 99.
To set the detune value:
1. Select desired SHIFT mode.
2. Use VALUE to scroll to detune (D.).
3. Press VALUE to enter the detune sub-menu.
4. Turn VALUE to adjust detune in increments of one cent in either
plus or minus amounts.
5. Once the desired detune value is found, exit the detune sub-menu
by pressing any mode button.
Detune can be added to any SHIFT 2 interval by enabling the S2D2 sub-
menu within X-MOD. The detune setting in SHIFT 2’s D. menu at the time
that S2D2. is enabled will be added to SHIFT 2’s interval setting. For
example, if SHIFT 2 is set to 1OCT and SHIFT 2’s detune is set to +16c,
when S2D2 is ON, SHIFT 2 transposes by a total amount of 1OCT+16c.
This is useful for creating lush detuning sounds between SHIFT channels
1 and 2 when they are set to the same SHIFT mode value.