User Manual

PRESET MODE – In PRESET mode, the VALUE knob selects which presets

to load, and save. Turn VALUE to select a desired preset then press VALUE

to load the selected preset.

The PITCH FORK

+ comes loaded with 10 unique factory presets (see

page 12) and 90 empty slots. The factory presets will guide you through

the pedal’s potential by showcasing some of its features. Any of these

factory presets can be overwritten at any time. See page 12 for

instructions on how to restore the factory presets.

Load a preset: While in PRESET mode, turn VALUE to scroll through the

preset slots. The preset slot number blinks to indicate the selected slot is

not currently loaded. Occupied preset slots will have a dot in the lower

right corner. The preset number stops flashing when VALUE is pressed to

load a valid preset, otherwise it will continue to blink if empty.

Save a preset: Select the desired slot within the PRESET menu by turning

VALUE. The preset slot number blinks when the selected slot is not

currently loaded. Empty slots will have no dot in the lower right corner.

Press and hold VALUE for two seconds, the PRESET button will first blink

then remain lit when the saving process is complete.

Altered presets: The PRESET button blinks when one or more parameter

values are altered from the stored state except when LIVE is loaded. The

blinking continues until the controls are adjusted back to the original

stored value, a preset is loaded, or the altered preset is saved.

LIVE is a preset template to aid with new preset creation. LIVE is found

before slot 1. Any changes made to LIVE while the pedal is powered, are

held in that slot even if other presets are loaded or saved. The LIVE

settings can be stored at any time to a preset slot (see Save a preset).

Important:

Upon power up, LIVE reverts to its default settings. If you

want to keep any changes made to LIVE, they must be saved to a preset

slot before powering off the pedal. LIVE’s volume settings for DRY, SHIFT

1, and SHIFT 2 are the actual positions of the knobs.

FACTORY DEFAULT LIVE SETTINGS

AUX

SHIFT 1

SHIFT 2

EXP

USER

X-MOD

LATCH

ALL

-1OCT

+1OCT

FREQ. set to BOTH

SHF1

OFF

LATC