User Manual

- CONTROLS, INDICATORS, & I/O -

MICRO POG SECTION

DRY Knob - Controls the output volume of the DRY signal. The DRY signal is

the signal present at the INPUT jack. As this knob is turned clockwise, the

volume of the DRY signal increases. If the Holy Grail Plus is set to ECHO Mode,

the DRY knob sets the delay’s feedback for the dry signal. See page 5 for more

info on the ECHO mode.

SUB OCTAVE Knob - Controls the output volume of the SUB OCTAVE signal.

The SUB OCTAVE signal is one octave below the original input signal, half the

frequency of the input signal. As this knob is rotated clockwise, the volume of

the SUB OCTAVE signal will increase. If the Holy Grail Plus is set to ECHO Mode,

the SUB OCTAVE knob sets the delay’s feedback for the SUB Octave signal. See

page 5 for more info on the ECHO mode.

OCTAVE UP Knob - Controls the output volume of the OCTAVE UP signal. The

OCTAVE UP signal is one octave above the original input signal or twice the

frequency of the original input signal. The volume of the OCTAVE UP signal

increases as this knob is rotated clockwise. If the Holy Grail Plus is set to ECHO

Mode, the OCTAVE UP knob sets the delay’s feedback for the upper octave

signal. See page 5 for more info on the ECHO mode.

STEREO ELECTRIC MISTRESS SECTION

RATE Knob - This knob controls the speed or rate of the LFO signal that

modulates the flanger. It also controls the rate of the Chorus effect. Turning the

RATE knob clockwise increases the rate of modulation. When the RATE knob is

turned down, between fully counter-clockwise and the 10 o’clock position, the

Stereo Electric Mistress will enter Filter Matrix mode. In Filter Matrix mode the

LFO signal is disconnected from the Flanger and Chorus so that you can

manually modulate the Flanger/Chorus by turning the RATE knob. Keep the

RATE knob below 10 o’clock to keep it in Filter Matrix mode.

FLANGER Depth Knob - Controls the amount of Flange that is mixed with the

direct signal. The more you turn the knob clockwise, the more pronounced the

flanger effect will be. Turning the FLANGER knob down completely bypasses the

flanger.

CHORUS Depth Knob - Controls the amount of the chorus sound. The more

you turn the knob clockwise, the more pronounced the chorus effect will be.

Turn the CHORUS knob down completely to bypass the chorus effect.

Hint - The Flanger and Chorus effect can be used together. While each individual effect

produces rich sweeping textures, together they can produce dramatically different and

warm soundscapes that are not available when one effect is used alone. See page 5 for

more information on the Stereo Electric Mistress sounds.