User Manual

DOUBLE MUFF
Classic Dual Muff Overdrive
Congratulations! You have just purchased the finest overdrive pedal
developed to date for the electric guitar player. The Double Muff takes our
original Muff Fuzz circuit and doubles it so that you have two Muff Fuzzes in
one pedal. You have the option of using just one Muff for a hint of milky
distortion, or cascading the second Muff for over-the-top overdrive that turns
your milk into cream.
In single mode, the amount of overdrive will lessen as you decrease the
volume on your guitar. You can compensate for this by increasing the
volume of the Single Muff. In Double Mode, the Muff knobs will interact with
each other so that you can tweak your sound for the perfect amount of
distortion every time.
-CONTROLS-
SINGLE/DOUBLE Switch— Selects between one Muff in SINGLE mode or
two Muffs in series in DOUBLE mode.
MUFF 1— Sets the overall output level for the Double Muff in either mode.
MUFF 2— Sets the output level for the first Muff in Double mode. In Single
mode this knob is inactive.
STATUS— If on, the unit is engaged. If off, the unit is in True Bypass mode.
-OPERATION AND WARNINGS-
Plugging into the input will activate power from the internal 9-volt battery or
external battery eliminator. The input cable should be removed when the
unit is not in use to avoid running down the battery.
In Double mode, the Double Muff has very high maximum gain, requiring
that pickups and cables be well shielded and properly grounded to avoid
excessive hum.
The small jack on the back of the Double Muff is for a 9-volt battery
eliminator capable of delivering 100mA of current. The unit’s battery may be
left in or taken out when the eliminator is in use.