User Manual

- POWER –
Power from the internal 9-volt battery is activated by plugging into the INPUT jack. The input
cable should be removed when the unit is not in use to avoid running down the battery.
The barrel connector on the front of the CHILLSWITCH is for a 9-volt battery eliminator
capable of delivering at least 25 mA of current. The optional 9V power supply from Electro-
Harmonix is 9.6DC-200BI (same as used by Boss™ & Ibanez™) 9.6 Volts DC 200mA. The
power supply must have a barrel connector with center negative. The unit’s battery may be
left in or taken out when the eliminator is in use. The actual current draw of the
CHILLSWITCH is 12.5 mA.
To change the 9-volt battery, remove the 4 screws on the bottom of the CHILLSWITCH.
Once the screws are removed, take off the bottom plate and change the battery. Please do
not touch the circuit board or you risk damaging a component.
Input Jack Impedance
Output Jack Impedance
INPUT – 2.2 MΩ
AMP – 220 Ω
RETURN – 2.2 MΩ
SEND – 220 Ω
– WARRANTY INFORMATION –
Please complete and return the enclosed warranty card within 10 days of purchase. Electro-
Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects
in materials or workmanship for a period of one year from date of purchase. This applies only
to original purchasers who have bought their product from an authorized Electro-Harmonix
retailer. Repaired or replaced units will then be warranted for the unexpired portion of the
original warranty term. If you should need to return your unit for service within the warranty
period, please include a brief description of the problem as well as you name, address,
telephone number, copy of your receipt, and a check or money order.
The costs for shipping and handling are listed below.
To hear demos on all EH pedals visit us on the web at www.ehx.com.
Email us at [e-mail]