User Manual

12
2. You will need to hold down the MODE for 3 seconds. Nothing will occur for 2
seconds, then all of the mode LEDs will blink for 1 second.
3. After the LEDs stop blinking, let go of the MODE knob. The Preset LED will light
up solid.
4. Your preset has been saved in the mode that is currently lit.
PRESET LOAD PROCEDURE:
1. To Load a preset you previously saved: turn the MODE knob to the mode where
the preset was saved.
2. Press and release the MODE knob. The PRESET LED will light up to indicate that
the Preset has loaded. Please Note: The current knob positions are no longer
valid.
After loading a preset, if you move a knob, the knob’s new location will supersede the
preset’s stored value for that knob. At this point, the PRESET LED will blink rapidly to
indicate that a knob has been moved.
PRESET UNLOAD PROCEDURE:
A preset can be unloaded to restore the current knob positions so they represent what you
hear. There are two ways to unload a preset, press and release the MODE knob or turn the
MODE knob to another mode.