User Manual

22
SECONDARY OPERATIONS REFERENCE TABLE
Attack Decay
Secondary Mode
1st Button(s) Hold/
2nd Button Press
Operation Notes
Custom Expression Setting
BYPASS FSW/
PRESET 1
Create custom expression
settings where any knob is
swept by expression or CV.
Saving Presets (can also be
used to save altered presets)
PRESET 1, 2, or 3
Hold down preset button
for 2 seconds to save.
Recalling Presets
PRESET 1, 2, or 3
Press and release preset
button to recall preset.
Unloading Presets
PRESET 1, 2, or 3
Press and release preset
button to go back to live.
Altering Presets
--
Move any knob or change a
mode while in a preset.
Reloading Presets
PRESET 1, 2, or 3
Press and release altered
(blinking) preset button.
Footswitch Preset Control
HARMONIX FSW
Cycle through presets and
WYSIWYG with each press
and release of HARMONIX.
Continuous Envelopes
(Tremolo)
BYPASS FSW/
HARMONIX FSW
Restarts volume envelopes
automatically.
Envelope Curves – Attack
POLY + PRESET 2/
PRESET 1
Mono mode only: choose
Attack curve taper: linear,
parabolic or s-curve.
Envelope Curves – Decay
POLY + PRESET 2/
PRESET 3
Mono mode only: choose
Decay curve taper: linear,
parabolic or s-curve.
Harmonix Blend Mode
BYPASS FSW/
PRESET2
BLEND knob mixes dry and
Harmonix into envelopes.
Return Blend Mode
BYPASS FSW/
PRESET 3
BLEND knob mixes dry
return and env output.
Harmonix FX Loop Position
POLY + PRESET 3/
PRESET 1
Hold down POLY and
PRESET 3 then press and
release PRESET 1.
Return Bypass
(FX Loop active in bypass)
POLY + PRESET 3/
BYPASS FSW
When in Bypass mode, the
RETURN jack is connected
to OUTPUT jack.
BYPASS FSW Manual Trigger
POLY/
BYPASS FSW
Press/release BYPASS to
trigger volume envelopes,
audio does not trigger.
External Clock Trigger
POLY/
PRESET 1
Clock pulse on EXP jack
triggers volume envelopes,
audio does not trigger.
Internal Compressor
POLY + PRESET 3/
PRESET 2
Disables or enables the
internal compressor.
Factory Restore
BYPASS
hold during power up
Restores all presets and
secondary modes to factory
settings.