User Manual

17
MANUAL ENVELOPE TRIGGERING WITH THE BYPASS FSW
In normal operation, the Attack Decay triggers a new envelope with every
detected pluck at the INPUT jack. As an alternative, new envelopes can
instead be triggered manually by pressing and releasing the BYPASS
footswitch. To activate this mode:
1. Press and hold the POLY button.
2. While the POLY button is held, press and release the BYPASS
footswitch. After releasing the footswitch, release the POLY button.
3. The BYPASS LED will blink quickly to indicate that you have enabled
triggering with the BYPASS footswitch.
4. To return to the default pluck detect functionality, repeat steps 1 & 2
above. The BYPASS LED will blink slowly to indicate that you have
returned to the default BYPASS footswitch functionality.
 When manual triggering is enabled, the Attack Decay’s automatic
pluck detect is disabled. Simply tap the BYPASS footswitch to trigger
the beginning of a new volume envelope.
 To bypass the Attack Decay, press and hold the BYPASS footswitch
for 2 seconds.
 If in Bypass, press the BYPASS FSW once to enter effect mode.
 When saving presets, each preset saves its own manual triggering
status. If manual triggering is enabled when a preset is saved, that
preset will turn on envelope triggering when recalled, and vice versa.
EXTERNAL CLOCK TRIGGERING
By default, the EXP jack on the Attack Decay accepts a connection from
an expression pedal or CV. The Attack Decay can also be configured to
accept an external clock signal as a trigger source. The acceptable clock
pulse voltage range is 1.5Vpp to 15Vpp. To enable external clock trigger:
1. Press and hold the POLY button.
2. While the POLY button is held, press and release the PRESET 1 button.
After releasing PRESET 1, then release the POLY button.
3. The PRESET 2 button will blink quickly to indicate that external clock
triggering has been turned on.
4. To turn off external clock triggering, repeat steps 1 & 2 above. The
PRESET 2 button will blink slowly to indicate that external clock
triggering has been turned off.
 When external clock is enabled and a plug is inserted into EXP jack,
the Attack Decay’s automatic pluck detect is disabled. If you remove
the EXP plug or disable external clock then automatic pluck detect will
be enabled.
 The external clock setting can be saved independently to each preset.