User Manual

12
SAVING ALTERED PRESETS
To save an altered a preset, follow the instructions above for Saving
Presets. You may save to the same preset number or a different one.
EXPRESSION PEDAL POSITION RECALL
If an expression pedal is attached to the Attack Decay at the time you
save a preset, the preset saves the position of the expression pedal. When
you recall the preset, it also recalls the saved position of the expression
pedal—whether an expression pedal is attached or not. You must move
the expression pedal after loading the preset to give back control of the
expression sweep settings to the expression pedal.
HARMONIX/PRESET FOOTSWITCH CONTROL OVER PRESETS
The HARMONIX/PRESET footswitch’s normal function is to turn the
Harmonix distortion on and off. Alternatively this footswitch can be
reconfigured to load and cycle through presets instead:
TOGGLING HARMONIX/PRESET FOOTSWITCH FUNCTION:
1. Press and hold the HARMONIX/PRESET footswitch.
2. After 1 second, the P LED lights solid to indicate that the
footswitch now controls presets and not Harmonix on/off.
3. Once the P LED lights up release the footswitch.
4. Repeat the same procedure to reinstate Harmonix on/off control
back to the HARMONIX/PRESET footswitch.
5. The state of HARMONIX/PRESET control is saved after power
down. It is not saved to presets.
When the HARMONIX/PRESET footswitch is controlling presets, each tap
of the footswitch will load the next preset. The pedal will return to
WYSIWYG (live) mode in between Presets 3 & 1.
Note: The current status of the Harmonix distortion will be saved to
WYSIWYG mode when the HARMONIX/PRESET footswitch is changed to
control presets.