User Manual

22
28
DEPTH
Smoothly controls the DEPTH
parameter over its entire range
0…100=0% to 100%
101…127 amplify
step values that are
set below step slider
maximum
29
TAP DIVIDE
Controls the TAP DIVIDE setting
0=off or 1/4 note
1=dotted 8th
2=1/4 note triplet
3=8th note
4=8th note triplet
5=16th note
6=32nd note
30
EXPression MODE
Controls the EXPression MODE
setting
0=off
1=RATE
2=DEPTH
3=GLIDE
4=SEQ LENGTH
5=EXT. CLOCK
31
PLAY MODE
Controls the PLAY MODE setting.
Whenever this setting changes, the
digit display flashes the new mode.
0=LOOP
1=1-SHOT
2=STEP-THRU
33
Encoder MODE
Directly sets the Encoder MODE
0=GLide
1=DIRection
2=Seq Length
3=DEPTH
4=Preset
34
PLAY FSW
Engages PLAY function. In Step-Thru
mode both 0 and 127 advance the
sequence.
0=stop
127=start
35
RESET FSW
RESET FSW press
127=RESET FSW
press
36
TAP FSW
TAP FSW press
127=TAP FSW press
37
TAP DIVIDE
BUTTON
TAP DIVIDE Button press
127=TAP DIVIDE
press
39
EXP. MODE
BUTTON
EXP. MODE Button press
127=EXP. MODE
press
40
ENCODER MODE
BUTTON
ENCODER MODE Button press
127=MODE press
41
Sequencer Step
When the sequencer is stopped or if
PLAY MODE is set to Step-Thru, this
CC forces the sequencer to jump to
a step immediately. If the sequencer
is running, this CC is ignored
1…8 directly chooses
the sequencer step
117
Save Preset
Save current 8-STEP settings to
preset number specified in data field
of this CC message. If the data value
is above 99, the CC message is
ignored.
0…99= immediately
save to preset
number equal to
value of CC
118
Load Preset
Load or cue preset. Preset number is
specified in the data field of this CC
message. If the data value is above
99, the 8-STEP unloads the current
preset.
0…99= load preset
number equal to
value of CC.
100…127= unload
preset