User Manual

9
FADEOUT MODE
1. Fadeout mode is entered when the display flashes F.
When in Fadeout mode, turn the LOOP knob to select fadeout times from
between 0-9, where a value of ‘0’ disables fadeout. The numerals in the
range 0-9 do not represent actual seconds. Instead, each numeral identifies
a specific Fadeout time as indicated in the following chart:
Fadeout
Value
Fadeout
Time (sec)
0
0
1
1
2
3
3
6
4
10
5
15
6
20
7
30
8
45
9
60
2. A fadeout sequence is started by selecting a value from 1-9 and stopping
loop playback via the LOOP or STOP/FX footswitch.
3. The PLAY LED flashes quickly during the entire fadeout sequence. When the
fadeout sequence is complete, the PLAY LED remains off and playback is
stopped.
4. An active fadeout sequence can be canceled at any time by pressing the
LOOP footswitch to resume playback, or by pressing the STOP/FX footswitch
to stop playback early.