User Manual

Play Along With The Loop Using Echo

18. While the loop is playing, turn the HAZARAI knob clockwise to your favorite echo

mode.

19. Turn the knobs to create an echo effect that you like.

20. Start playing with your loop while echoes are applied to your notes.

21. You can overdub at this point if you like. Press and hold the TAP/RECORD

Footswitch. The echoes will be recorded in the overdub.

Erase The Loop

22. Press the BYPASS Footswitch so that you enter Bypass mode and the STATUS

LED is off.

23. Press and hold the TAP/RECORD Footswitch for half a second.

24. Release the TAP/RECORD Footswitch once the LOOP LED goes off, the loop is

now erased forever.

Saving a PRESET

1. When you create an echo effect that you like, you can save the sound as a

preset.

2. To save a preset, press and hold down the HAZARAI knob. You will need to hold

down HAZARAI for 3 seconds.

3. After holding down the HAZARAI knob for 2 seconds, all of the MODE LEDs will

blink for 1 second. After they stop blinking, the preset is saved and you can

release the HAZARAI knob.

4. Upon releasing the HAZARAI knob, the PRESET LED will light up to indicate that

a preset is currently loaded.

Loading a Preset

5. Turn the HAZARAI knob to the mode LED where you saved the preset.

6. Press and release the HAZARAI knob. The PRESET LED will light. Your preset is

now loaded.

7. The knob positions no longer represent the effect you hear.

- DESRIPTION OF MODES -

The Stereo Memory Man with Hazarai has 8 modes to choose from. Each mode gives the

musician a different sonic palette to work with. In addition each mode changes the

function of some of the SMMH’s knobs. In this section we will describe each mode and the

functionality of the knobs that change with the mode.

Use the HAZARAI knob to cycle through the modes. Turning the HAZARAI knob Clockwise

goes up the LED ladder. Turning the HAZARAI knob Counter-Clockwise goes down the LED

ladder.

Below is a table displaying the function of each knob as it relates to the selected HAZARAI

mode. Arrows indicate the function that occurs as the knob is turned to or towards the

extreme knob position in that direction. You will notice some knobs, such as BLEND do not

change with the HAZARAI mode while others, such as DECAY have a different function for

nearly every different HAZARAI mode.