Owner's manual

6. SysEx Messages
32
6 SysEx Messages
The following is a list of the TWEAKER’s factory default MIDI note and CC settings.
6.1 System Exclusive Command Bytes
The System Exclusive message includes the ocial MIDI Manufacturer ID for ELECTRIX, a Product
number, and the Command number. Each command is described in the following sections.
240, 0, 1, 106, 1, NN, ..., 247
The ELECTRIX identication number is 6A
The TWEAKER product number is 01
The Command number is NN
Note: All numbers in this specication are Base-10 (Decimal) numbers unless otherwise noted.
6.2 Set Messages
These messages allow you to change the settings of the TWEAKER.
01 : Button Mappings
This Message changes the MIDI mapping (Channel, Note/CC, and Number).
Total Bytes: 107
Data Bytes: 100
Data Bytes per Button: 2
1st Data Byte Received: Mapping Number
2nd Data Byte Received: Channel Number/ Output Type
Special Cases:
Encoder Speed Control Button
Output Type = 1
Mapping Number = 127