Reference Manual

3. Traktor Pro 2 Mapping Details
16
8 The 3 encoders are eect button 1-3 (push) and eect knob 1-3 (turn).
8 Pushing the top encoder while holding Shift toggles the eect unit between group and single.
8 Holding shift and turning an encoder selects its eect.
8 The faders become Dry/Wet controls, with dry at the top, and wet at the bottom. You can still
seek while holding shift.
Pitch (Yellow)
Pitch Mode is also available but is considered an emergency feature and can only be accessed by
holding Shift while pressing the Control Mode buttons. This goes directly to pitch mode, no matter
what mode you are currently in. Pressing the Control Mode button again returns to EQ mode.
PITCH
BUTTON:
ENCODER:
RING:
TURN: RANGE
PUSH: RESET
BUTTON:
ENCODER:
RING:
PUSH:
AUTO XFADE
BUTTON:
ENCODER:
RING:
TURN: FINE PITCH
PUSH: XFADER
ASSIGN
PITCH
BUTTON:
ENCODER:
RING:
TURN: RANGE
PUSH: RESET
BUTTON:
ENCODER:
RING:
TURN:
XFADER CURVE
PUSH:
AUTO XFADE
BUTTON:
ENCODER:
RING:
TURN: FINE PITCH
PUSH: XFADER
ASSIGN
PITCH MODE PITCH MODE