FIELD INSTALLATION GUIDE G iLas PATENT PENDING TM 6 iLas TM PATENT PENDING E L E C T R I X , I N C . 4 5 S P R I N G S T R E E T N E W H AV E N , C T 0 6 5 1 9 T E L 2 0 3 7 7 6 5 5 7 7 w w w. e l e c t r i x .
PRE-INSTALLATION 1 PLEASE NOTE: WALL MOUNT EXTRUSION OR 12” ADJUSTABLE FILL KITS MAY REQUIRE FIELD TRIMMING. PLEASE VIEW ALL DIMENSIONS PRIOR TO INSTALLATION. FASTEN WALL MOUNT EXTRUSION TO VERTICAL STUDS USE SUPPLIED LINKING BARS TO CONNECT & ALIGN WALL MOUNT EXTRUSIONS END TO END. 6.
CEILING INSTALLATION 3a 3 ATTACH GUY WIRE 7” for iLas6 4.75” for iLasG 3b USE SUPPLIED SCREWS TO JOIN FRAMING END TO END. 3d CONNECT PRIMARY 120 / 277V AC FEED ATTACH T-RAIL WITH GUY WIRE TO TABS OR 3c TIGHTEN LINKING BAR INSTALL DRYWALL CEILING INSTALL CEILING LUMINAIRE INSTALLATION SECURE SAFETY LANYARDS TO LUMINAIRE WITH SUPPLIED SCREWS.
5 IMPORTANT NOTE! iLas™ POWER CONNECTORS ARE SPECIFICALLY DESIGNED TO LINK EACH LUMINAIRE TO THE CORRECT POWER SUPPLY. DO NOT MATE BLACK CONNECTORS TO GRAY CONNECTORS. FORCING A CONNECTION WILL CAUSE DAMAGE TO THE LUMINAIRE AND VOIDS PRODUCT WARRANTY. GRAY TO GRAY BLACK TO BLACK GRAY BLACK 7 6 ADJUST THE PEAK OUTPUT ANGLE VERIFY ALIGNMENT TUCK CABLE SLACK BEHIND LUMINAIRE AFTER IT HAS LOCKED INTO PLACE.
