User Manual

6
CONTROL PANEL
POWER
Turn the appliance on/off
MODE Button
Select the function of the unit between: DEHUMIDIFY, FAN and LAUNDRY
modes. The LED’s will illuminate to show which mode is selected.
DEHUMIDIFY: The unit will dehumidify and aim for the humidity set using the
up and down buttons.
FAN: Only the fan will run and water is not extracted.
LAUNDRY: The unit will dehumidify at the maximum level, ideal for drying
clothes.
HUMIDITY SETTING
Press the UP and DOWN buttons to select the desired relative humidity
level.DOWN can be repeatedly pressed unti CO is displayed, or UP can be
repeatedly pressed until AU is displayed
CO: Continuous mode, the unit will run continuously, and will only stop for
defrosting, or if the water tank is full.
AU: Automatic mode. The desired humidity is dependant on the room
temperature
≤ 20°C - Desired humidity is set to 60%
21 ≤ room temp ≤ 27°C - Desired humidity is set to 55%
˃ 27°C - Desired humidity is set to 50%
FAN SPEED
Use to select the fan speed. The LED’s above will illuminate to show the fan
speed selected.
Note: The fan speed cannot be changed in AU mode when the temperature is
above 27°C
TIMER
Press the TIMER button to program the timer. When the timer is activated the
"TIMER" light will be illuminated. Before programming the timer, ensure the
timer function has not been activated (the light must be off). The following timer
programs are available.
DELAYED POWER-ON FUNCTION: With the appliance in stand-by,
repeatedly press the TIMER button to select in how many hours time you
require the unit to start (0~24 hours).
DELAYED POWER-OFF FUNCTION: While the appliance is running with the
desired settings, repeatedly press the timer button to set in how many hours
time you require the unit to stop (0~24 hours).