User Manual

Page 10 of 18
POWER BUTTON
Press to turn unit “ON” or “OFF”
TEMPERATURE UP & DOWN
During cooling/heating function – These buttons raise or lower the temperature by 1
o
C for each
press. The minimum temperature is 16
o
C and max. 31
o
C.
FAN SPEED
Press to select either LOW, MEDIUM or HIGH fan speed.
NOTE: In dehumidifying function, this button is invalid as the unit is designed to run at low speed in
dehumidifying mode.
SLEEP MODE
Press the Sleep mode button until the unit enters sleep mode, the default fan speed is low and the
Sleep mode indicator led will illuminate. When the sleep mode is turned on:
Under cooling mode: After one hour the set temperature will increase by 1 degree Celsius, after
another hour the set temperature will increase by another degree, and will then remain set at that
temperature.
Under Heating Mode (P12HPW Only): After one hour the set temperature will decrease by 1
degree Celsius, after another hour the set temperature will decrease by another degree, and will
then remain set at that temperature.
Please note:

Sleep mode cannot be used in dehumidifying and fan mode.

If internal tank becomes full, the machine will enter standby and sleep mode will be
cancelled.
SWING BUTTON
After machine is on and mode selected, press this button and the louver will swing continuously up
and down; by pressing this button again the movement will stop and the louver remain fixed in
position.