User Manual
Page 11 of 18
PROGRAMMABLE TIMER
The in-built timer will allow you to set the unit to turn on or turn off after a set period of time,
Please note only one timer can be used at any time.
ON TIMER – The timer will turn on the unit automatically after the time set has elapsed.
1.
When on standby, press the TIMER button, then set the number of hours time you desire
the unit to start by pressing the TEMP+ or TEMP- button.
2.
Once the set time has elapsed, the unit will turn on automatically.
3.
Press the POWER button before the time has elapsed and the unit will turn on as normal
and the timer will be cancelled
4.
The function and fan speed can be set whilst setting the timer.
OFF TIMER – The timer will turn off the unit automatically after the time set has elapsed.
1.
While the unit is operating, press the TIMER button then set the number of hours time you
desire the unit to stop by pressing TEMP+ or TEMP- button.
2.
Once the set time has elapsed, the unit will turn off automatically.
3.
Press the POWER button before the time has elapsed, the setting time will be cancelled and
the unit will turn off.
MODE
Pressing this button will select between the Cooling
/
Heating (P12HPW ONLY) / Fan /
AUTO or Dehumidify
LED DISPLAY
The display indicates the current target temperature or the remaining timer settings. When the set
temperature or the timer is adjusted, the new setting is shown.
The display is also used to show error codes. Should a fault occur, see ERROR CODES.
WF INDICATOR
When illuminated this indicates that the internal water tank is full and requires emptying,
following the information provided in the water drainage section.
WIFI INDICATOR (P12HPW ONLY)