User Manual
3
PARTS AND FEATURES
The MD900 dehumidir uses compressor free eco-friendly Pelr technology which makes it light and quiet.
It is perfect for small rooms, kitchens, wardrobes, small boats and caravans. The MD900 is an ultraportable
dehumidir that will solve unwanted humidity issues, prevenng mould, fungus and bad smells.
SET - UP AND OPERATION
1. Remove the dehumidier and power cord from the packaging.
2. Plug the power cord into the power socket in the rear of the
unit, and then connect the plug
to an appropriate mains socket.
3. Press the Power buon, the indicator LED will illuminate green and the dehumidir will
begin to operate. You should be able to feel the air blowing from the air outlets on the top
of the dehumidir.
4. To switch o the unit, press Power buon, the indicator LED will go out and the dehumidir
will turn o.
Dry Air Outlet
Air Inlet
DC Power Input
Removable
Water Tank
Power Buon
GREEN:
GREEN FLASHING: Tank Full
Water Inlet
Drainage Hole
DC Power Jack
AC DC Power
Supply
4
WATER DRAINAGE
To empty the water tank:
• Turn o the dehumidir by pressing the power buon so
that the indicator LED goes out.
• Remove the water tank from the unit, by holding the
handle on the tank and sliding it out of the rear of the unit.
• Empty the water in to a toilet or sink.
• When the water tank has been empd, insert it back into
the unit.
To connue dehumidifying, press the Power buon so that the LED indicator is
green, and the dehumidir
will start to operate
CARE AND MAINTENANCE
Always turn o the unit and unplug it from the mains before cleaning or performing any maintenance. When
it is not in use for long periods, it is advisable to unplug the appliance. Do not use chemical solvents (such as
benzene, alcohol or gasoline) as they may cause irreversible damage to the unit.
CLEANING THE CASING
Use a piece of so cloth to cle
an the surface of the product or use a brush to wipe dust o the air inlet and
the air outlets.