Manualshelf

User Manual

ManualsBrandselectriQ ManualsAir Conditioners9000 BTU WIFI Smart A+++ easy-fit DC Inverter Wall Split Air Conditioner with Heat Pump & 5 meters pipe kit
12345678910
OPERATION
9
TEMPERATURE
The desired temperature is set with the up and/or down button, within the limits of the
thermostat: 16°C – 31°C.
Use the FAN SPEED button to set the fan speed at low, medium and high; or automatic (the
symbol on the display will flash). The fan speed in the automatic setting is determined by the
difference between the set temperature and the room temperature.
SETTING UP THE REMOTE
When batteries are first inserted into the remote or following changing the batteries, the remote
must be set up for COOLING AND HEATING or COOLING ONLY.
When the batteries are inserted turn off the remote then press and hold the MODE button until
is displayed to select cooling only. press and hold the MODE button until is displayed to select
heating and cooling.
If the remote is set up for the wrong type of unit, simply remove the batteries and reinsert, before
following the step above.
DISPLAY PANEL
No.
Display
Function
1
Health
Illuminated during Health function
operation
2
Temperature Display /
Error code
Illuminated during Timer operation
when air conditioner is operational
Displays error code in case of
malfunction
3
Wi-Fi
Illuminated when Wi-Fi is operational