User Manual

WIFI SETUP AND SMART FEATURES

WIFI SETUP

BEFORE YOU START

• Ensure your router provides a standard 2.4ghz connection.

• If your router is dual band ensure that both networks have different network names (SSID). The provider

of your router / Internet service provider will be able to provide advice specific to your router.

• Place the air conditioner as close as possible to the router during setup.

• Once the app has been installed on your phone, turn off the data connection, and ensure your phone is

connected to your router via wifi.

DOWNLOAD THE APP TO YOUR PHONE

Download the ”TUYA SMART” app, from your chosen app store, using the QR codes below, or by

searching for the app in your chosen store.

Android IOS

CONNECTION METHODS AVAILABLE FOR SETUP

The air conditioner has two different setup modes, Quick Connection and AP (Access Point). The

quick connection is a quick and simple way to set the unit up. The AP connection uses a direct local

wifi connection between your phone and the air conditioner to upload the network details.

Before starting the setup, with the air conditioner plugged in, but turned off, press and hold the Fan

Speed button on the air conditioner for 5 seconds (until you hear a bleep) to enter the wifi connection

mode. Please note the WIFI mode cannot be adjusted from the remote.

Please ensure your device is in the correct WIFI connection mode for the connection type you are

attempting, the flashing of the WIFI light on your air conditioner will indicate this.

Connection Type

Frequency of Flashes

Quick Connection

Flashes twice per second

AP (Access Point)

Flashes once per three seconds

CHANGING BETWEEN CONNECTION TYPES

To change the unit between the two WIFI connection modes, hold the Fan Speed button on the air

conditioner for 3 seconds.