Instruction Manual

17
THE SETTINGS SCREEN
This screen gives you the option to adjust the volume of
the robot’s voice and update some of the device’s basic
settings.
Clear current map – clear map to start a new room.
Crossing Obstacles – whether to allow robot to cross
1cm doorways and other obstacles.
Breakpoint Cleaning – permit robot to break off from a
cleaning job to recharge then continue the remaining
clean.
Voice Switch - adjust the volume of the robot’s voice.
Set Remark – change the name of the Robot.
Schedule – set a schedule for the robot to clean in the
future.
Cleaning Record – a log of the work your robot has
done.
Voice Pack – install a different voice.
Area unit – choose between ft² or m².
Check for update – update to the latest firmware.
Shared device - share access to the controls of your
cleaning robot with friends and family.
Model – this is the full model number.
Upload problem log – upload error file for support.
Third Party Control - this allows the unit to be integrated
with your favourite home automation hardware such as
Google Home and the Amazon Echo.
EDULING