User Manual

MAINTENANCE

CLEANING AND STORAGE

ATTENTION: Please shut off the unit and unplug from the mains before cleaning or

performing any maintenance.

Cleaning the surface

Clean the grills with a duster or a soft wet cloth.

Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause

irreversible damage. Make sure no water enters the control panel or fan motor

Do not run the unit until completely dry.

Place the fan in its original box or cover the fan to protect it from dust.

Store it in a cool dry place.

TROUBLESHOOTING

Do not repair or disassemble the unit by yourself, unauthorized repair attempts will invalidate

the warranty and may cause bodily harm.

Issue

Possible Reason

Solution

No power

1. Power cord is unconnected

2. The There is no power from socket

3. The power switch is not on.

4. The fuse has blown

1. Connect the power cord

2. Check socket is turned on

3. Turn the unit on

4. Replace the fuse in the plug

Odour emission

from unit

1. New unit. When the unit is used for

the first time the fan motor may

produce and odour which will

dissipate within a week of use

1. No action required

Strong vibrations

and noise

1. Fan is not used on a flat surface

2. Fan may be damaged

1. Place on a flat surface. May put an

anti-vibration matt underneath

2. if fan is damaged discontinue use

and contact service centre

If the above solutions do not resolve the problem please contact the service centre.