User Manual

PATIO HEATER ASSEMBLY

Required Tools: Philip Screwdriver / Adjustable Spanners / Wrenches

Leak Detection Solution: One-part detergent and three parts water

Before assembly, ensure all packing material and any transit protection is

removed. Remove the door from the main body, and remove all the parts

packed within it.

STEP 1(Optional): Connect the BRACKET (N) and

WHEELS (M) to the base of the Main Body using the M6

SCREWS, WASHERS and NUTS (CC and DD)

STEP 2: Keep the burner with the ignition side up. Fix

the BURNER ASSEMBLY (J) to MAIN BODY (K) using

4 M5 SCREWS and WASHERS (BB).

STEP 3: Unscrew the M5 SCREWS and WASHERS (BB) preassembled in SUPPORT BAR – LOWER (F).

Connect the UPPER SUPPORT BAR (E) to the LOWER SUPPORT BAR (F) and fix them together using the

SCREWS and WASHERS. Repeat this step for all 4 SUPPORT BARS.