User Manual

STEP 10: Put the RUBBER RING (I) around the burner hole. Use the CONNECTOR (H) to join the two GLASS

TUBES (G). Hold the whole glass tube assembly carefully. Insert the top end into the bottom hole of the FLAME

SCREEN and slide through it as far as possible. Keep the whole glass tube assembly vertically and sit it on the

RUBBER RING (I).

NOTE: GLASS TUBES ARE FRAGILE, HANDLE WITH GLASS TUBES CAREFULLY AND SLOWLY!

STEP 11: Assemble LOWER MESH GUARD (D) and

UPPER MESH GUARD (C) to the front of the unit. Fix

the Guard Fastening Plates removed in step 8 to

secure he UPPER MESH GUARDS (C) in position.

STEP 12: Insert the base of the door into the bottom

slots. Attach the CHAIN (L) to the hook on the BURNER

ASSEMBLY (J) and close the door.