User Manual

6
OPTIONS
This hood supports both external venting or recirculation. The type of setup
should be decided before commencing installation.
EXTERNAL VENTING
A pipe is provided which allows
the cooking odours to be extracted
outside. If this is the chosen installation
method consideration to the route of the
vent pipe should be made. The mounting
plate contains a hole allowing the vent
pipe to be connected and routed through the
ceiling.
If a vent pipe is to run through the ceiling a hole with a diameter of around
170mm should be made in the ceiling before installation. This would allow the
vent pipe to run through the mounting plate.
This cooker hood also supports the recirculation of air
once it has passed through the . The ltered air is
then expelled through the vent holes in the side of the
chimney.
When setting the unit up in this , carbon
also be used to remove odours from the air.
Details of sourcing the can be found in
the Carbon section.