User Manual

15
TROUBLESHOOTING
Fault Cause Solution
Light on, but
fan does not
work
The fan blade is
jammed.
Switch off the unit. Repair to be
carried out by service
personnel only.
The motor is
damaged.
Both light
and fan do
not work
Halogen light bulb
blown
Replace the bulb with correct rating.
Power cord loose Plug in to the power supply again.
Excessive
Vibration
The fan blade is
damaged.
Switch off the unit. Repair to be
carried out by service
personnel only.
The fan motor is not
tightly.
Switch off the unit. Repair to be
carried out by service
personnel only.
The unit is not hung
properly on the
bracket.
down the unit and check
whether the bracket is in proper
location.
Suction
performance
not good
1 Grease
clogged
2 Distance between
the unit and the
cooking plane too
great.
1 Clean or replace grease . 2
Adjust the distance to between
70cm and 80cm.
SUPPORT
www.electriQ.co.uk
Unit J6, Business Park
Way, Elland
, HX5 9DA
: 0871 984 4416
Hours: 9:00am to 5:00pm Monday to Friday
PROTECTION
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.