User Manual

Table Of Contents

LIGHT BULB REPLACEMENT

ker hood is supplied with 4 long life LED light , Although these

are designed to have a very long lifespan ,should one fail, replacements are

available from the supplier of the hood and the guide below can be followed to

replace it.

1. Switch the unit off and ensure it is disconnected from the mains supply.

2. Remove aluminium grease , to prevent them from falling.

3. Use a screwdriver to carefully remove the metal retaining ring, which

holds the glass in place, ensuring the glass lens is not allowed to fall.

4. Remove the LED light bulb and replace with the same type and rated

LED lamp.

5. Hold the glass lens in position on the , and push the retaining ring

back into position to lock the glass in place.

6. Attach the aluminium grease back onto the unit.